200mm fog signal traffic flashing warning light

fog signal traffic flashing warning light

200mm iron shell fog signal traffic flashing warning light

First, the parameters of the 200 type iron shell fog lamp:

1. Product size: 240*240*120M

2. Illumination diameter: 200MM

3. Number of lamp beads: 180 yellow

4. Lamp Beads Category: Taiwan Crystal Chip Lamp Beads

5. Yellow wavelength: 590-595NM

6. Service life: 100000H

7. Shell material: electrostatic spraying, sheet metal chassis

8. Working temperature: -40 ° C -65 ° C

9. Protection level: IP65

10. Working voltage: AC85V-265V, a small amount of DC12V/24V

11. Rated power: 15W

12. Visual distance: ≥1000M

Second, the characteristics of 200mm iron shell fog signal traffic flashing warning light:

The 200mm iron shell fog signal traffic flashing warning light adopts Taiwan crystal chip lamp beads, which has high brightness, high refresh rate and long service life.

The bottom of the 200mm iron shell fog signal traffic flashing warning light is designed with a wire hole, which is not only convenient for outlet, but also has a good waterproof effect.

200mm iron shell fog signal traffic flashing warning light adopts integrated box body, which makes the product have better waterproof effect.

The back of the 200mm iron shell fog signal traffic flashing warning light is equipped with a key switch, which facilitates inspection and maintenance of the product.

Third, the installation method of 200mm iron shell fog signal traffic flashing warning light:

How to install the base:

1. Align the holes at the ends of the base with the holes at the bottom of the fixture.

2. Insert the shrapnel and gasket of M12 into the screw of M12.

3. The screw passes through the base and is screwed into the hole at the bottom of the lamp.

4, in order to prevent damage to the luminaire, it must be tightened (pictured)

5. Finally, put the whole lamp part into the pole (the line needs to pass through the pole)

Fourth, the wiring method of 200mm iron shell fog signal traffic flashing warning light:

Power on DC12C/24V:

1, red line – 12V / 24V positive

2, black line – 12V / 24V negative

3, wiring DC12V/24V

If you are interested in our product,Please fell free to contact with us