300mm Crosswalk Pedestrian led Traffic Light

300mm Crosswalk Pedestrian led Traffic Light

First, the parameters of the 300mm Crosswalk Pedestrian led Traffic Light:

Product model: WDM-RX300-02-RG

1. Product size: 750*350*110MM

2. Number of lamp beads: 65 reds, 120 greens

3. Lightning diameter: 300MM

4. Lamp Beads Category: Taiwan Crystal Chip Lamp Beads

5. Red wavelength: 620-625NM

6. Green wavelength: 500-505NM (blue-green) 520-525NM (green)

7. Visual distance: ≥1000M

8. Service life: 100000H

9. Shell material: PC

10. Illumination angle: 30°

11. Working temperature: -40 ° C -65 ° C

12. Protection level: IP53

13. Working voltage: AC85V-265V A small amount of DC12V/24V

14. Rated power: red 8W green 10W

15. Working mode: Reds static, green people dynamic

16. Installation method: horizontal or vertical

Second, the characteristics of the 300mm Crosswalk Pedestrian led Traffic Light

1.300mm Crosswalk Pedestrian led Traffic Light use Taiwan crystal chip lamp beads, high brightness, high refresh

rate, long service life.

2.300mm Crosswalk Pedestrian led Traffic Light on the back of the design of the outlet hole, not only easy to outlet,

but also has a good waterproof effect.

3.300mm Crosswalk Pedestrian led Traffic Light sunshade is made of PC material, which has better waterproof and

dustproof effect and simple installation.

4.300mm Crosswalk Pedestrian led Traffic Light, each lamp and lamp with a snap-on design, convenient for product

inspection and maintenance.

Third, the installation method of 300mm Crosswalk Pedestrian led Traffic Light:

Installation method: erect installation

1. Leave a screw on both ends and unscrew the nut on the screw.

2. Place the “L” bracket on the flat end and tighten the nut according to the hole position and the slot on the screw.

3. The sun visor is installed on the upper part of the lamp. The three-corner aluminum plate is folded into a circular

arc shape, which is placed on the lamp and screwed to the corresponding hole to tighten.

4. Make 2 holes on the signal light rod, drill holes according to the hole position of the L bracket of the signal, pass the

light rod with a suitable screw, and put the L-shaped bracket on the screw and fix it with the nut. (as the picture shows)

Note 2 points:

1. The visor is at the top of the lamp

2. The outlet hole is facing down

Fourth, 300 type pedestrian two-wire wiring:

1. Power on DC12V/24V:

Red positive electrode

Red black red light negative;

Green line green light negative;

2. Power up AC220V:

Black zero line;

Red line red light line;

Green line green light line;

In addition to the 300mm Crosswalk Pedestrian led Traffic Light, we also produces other traffic lights.

1,300mm full red yellow green traffic lights

2, 400mm full red yellow green traffic lights

3, 300mm full red green traffic lights

4, 200mm full red yellow green traffic lights, etc.

If you are interested in our product,Please fell free to contact with us