Australian vehicle mounted arrow board

Australian vehicle mounted arrow board

Our Shenzhen Wide Way Optoelectronics Co., Ltd. have been doing construction arrow signs in Australia for many years. Let ’s talk about the differences between Australian arrow signs and domestic vehicle guide signs:
The overall size of the Hong Kong car guide card is different from that of China. She is slightly larger. The most common Australian car guide card in Hong Kong has a size of 1800MM * 900MM car guide card. The advantage of this is its light tube. Slightly larger brightness will be higher, and eye-catching will be higher, because the Australian rule of law is still more advanced than domestic, so there will be certain requirements for the size of the vehicle-mounted guide plate lights;

At present, the size of the vehicle mounted arrow board is generally 1200MM × 600MM vehicle guide plate, and the size will be slightly smaller. Large construction vehicles will generally be equipped with 1200 × 600 vehicle guide plates, and pickup trucks will generally be equipped with 1200. × 400 vehicle-oriented guide card. At present, there is no national standard to set this requirement in China, but it is too small for Australia to meet his rule of law requirements. Why is Australia so big? Because Hong Kong is a continuation of the British standard, it turned out that his request in the UK was to use a large-sized light bulb that was large enough to be eye-catching.
2. What are the differences between the luminous diameter of the Australian vehicle guide plate and the domestic one?

The diameter of the light guide tube of the guide sign in Australia is generally 125MM. This is written in many tenders for transportation in Australia. In fact, many other countries also do the same. Like this,
Our company deliberately opened a mold of our company in order to make this car guide plate, and then has an appearance patent, so we have done this for many years, and then we also have some experience in the quality of this car guide plate, and then the certificate There are also some, so it is considered to give a little bit of personal insight to yourself;
The domestic car-oriented card lamp tube are generally 100mm or less, most think 100mm, also has a small 88mm or 75mm, although the brightness is also possible, but it has no fixed standard, so do out There are many types of vehicle mounted arrow board.

Third, what are the differences between the controller of the Australian vehicle-oriented signboard and the domestic one?
The controller of the Australian vehicle guidance arrow board is different from our domestic vehicle guidance card controller. The Australian vehicle guidance card controller requires that the front and back lighting effects are the same. There must be a dynamic effect on the front. He must Synchronized display,
The domestic vehicle navigation card controller buttons are a left direction button and a right direction button. When the left button of the vehicle navigation card is pressed, it displays a left arrow, and when the right button of the vehicle navigation card is pressed, it displays When both sides of the right arrow are pressed at the same time, he will flash together.
In short, Australia’s vehicle-oriented guidance cards are still relatively formal at the moment. I also hope that our country can unify these standards to make some standardized things, which can save a lot of manpower and material resources, and make vehicle-oriented guidancesignboard a standard It can be mass-produced, and the quality of batches is often much better, and the cost will gradually decrease.
Shenzhen Wide Way Optoelectronics Co., Ltd, a manufacturer of intelligent transportation products

If you are interested in our product,Please fell free to contact with us