How to increase the brightness of the 300mm Solar portable traffic lights?

The basic parameters of the 300mm Solar portable traffic lights

Product model: WDM-YD300-01
1. Lamp size: 1020*370*370MM
2. The bottom box size: 800*600*400MM
3. Total height 3200MM (including solar panels)
4. Lamp Bead Category: Taiwan Crystal Chip Lamp Beads
5. Number of lamp beads: 75 red, yellow and green *4
6. Red wavelength: 620-625NM
7. Yellow wavelength: 590-595NM
8. Green wavelength: 520-525NM
9. Shell material: electrostatic spraying, sheet metal chassis
10. Working temperature: -40 ° C -65 ° C
11. Protection level: IP65
12. Battery: 12V/100AH
13. Working voltage: DC12V
14. Rated power: red/yellow 20W green 24W
15. Solar panel: 80W/18V
16. Service life: 100000AH
17. Visual distance: ≥1000M
18. Working mode: remote control or manual control

Second, how to increase the brightness of the 300mm Solar portable traffic lights?

Under normal circumstances, a 300mm Solar portable traffic lights can be installed with a solar panel. The solar panels

that are standard on our company can ensure that the solar mobile traffic lights are used for more than 7 days in continuous

rainy days. If the mobile traffic lights are installed with 100 watts of solar panels, you can Guaranteed for more than 15 days

in continuous rainy days, we can also customize according to customer requirements.

There are several ways to increase the brightness of the 300mm Solar portable traffic lights:
1. The first one is the same type of mobile traffic light to increase the number of beads on each lamp. Of course, this method

will increase the purchase cost. we generally does not recommend this method unless the customer strongly requests it;
2, the second is to keep the lamp light clean, no dust to block the lampshade, there is no occlusion of the luminescence of the

lamp bead, the brightness will naturally increase, and this method does not require any cost, it takes a few minutes to clean up;
3. The third is to clean the solar panels that keep the solar moving traffic lights, because the solar panels are the key to converting

light energy into electrical energy. Keeping the solar panels clean can make the solar panels absorb more light energy and stabilize

the power supply. For the traffic lights, this does not require any cost, that is, it can be used to remove the solar panels at regular

intervals.

300mm Solar portable traffic lights have some precautions when installing:
1. The most important thing about our solar products is the illumination of 300mm Solar portable traffic lights. Then we must pay

attention to the installation: that is, the direction of our solar panels must be in the southeast direction (see the region, that is to

say(The solar panels must face the direction in which the morning sun rises.)

2. Another point is that our solar panels must be cleaned regularly, usually once every 2 months, so that no dust will accumulate on

the solar panels and thus affect the absorption of 300mm Solar portable traffic lights.