Is the red green plus traffic light use high voltage or low voltage?

Product parameters:
Outer box material: aluminum
Product size: 1500*60*24MM (length can be customized)
Red wavelength: 620-625NM
Yellow wavelength: 590-595NM
Green wavelength: 500-505NM
Working voltage: DC24V
Working temperature: -40 ° C ~ 60 ° C
Working humidity: ≤95% (25°C)
Protection level: IP53
Installation method: hoop
Light color: red, yellow, green
Number of lamp beads: 90 red, yellow and green
Visible distance: 1-1000M
Service life: 100000H
Working mode: always on, synchronized with the traffic light on the pole
Rated power: R / Y ≤ 5W, G ≤ 7.2W
Product weight: 2KG (without accessories)

Recently, there is a very popular traffic signal on the market – plus traffic lights. Do you know how this plus traffic light is linked

to the traffic lights on the pole? Or to say: how to add traffic lights to the traffic signal machine, as a plus traffic light manufacturer,

I will first say here, this plus traffic light must be low pressure, why is it necessarily low pressure? Because the plus traffic light is

attached to the top of the traffic light, the whole vertical raft is directly on the ground. There are many pedestrians passing by. At

this time, the voltage must be reduced to the voltage within the human body to ensure safety. And because of the low pressure,
How does the plus traffic light connect to the traffic lights on the pole? How does the plus traffic light connect with the high-pressure

traffic signal? We have made a transfer control box in this respect, or we have made a high pressure to low pressure control box in

this piece, this is a completely waterproof transfer control box, the volume is not very large, easy to install, transfer control There

are three separate power sources, red, yellow and green. The power supply is powered by Taiwan Mingwei.
Let us first look at the structure inside the transfer control box. Because Taiwan Mingwei power supply, the electrical performance

is better, the traffic signal is the basis of our intersection, it can not have any flash, so we are doing this in this piece, The best kind of

power supply.

How is the transfer control box installed? He has two parts, the first part is the high pressure part, the high voltage part is the red, yellow

and green, traffic light power, red light, fire line, yellow light, fire line, green light, fire line and public line docking, because this switching

power supply The output power, DC 24 volts, then our light belt traffic light has a DC24 volt interface to connect the DC 24 volt power cord,

our current switching power supply interface can be
Third, the special design of plus red and green – 6 degree angle:
First, let’s introduce the details of the plus traffic light. The plus traffic light, its outer casing is aluminum. It is an aluminum profile that

we open ourselves. Its illumination angle has an angle of 6 degrees. Why is it 6 degrees? Because the light of the plus traffic light must be facing

the vehicle in the corresponding lane, so we made a special angle of 6 degrees when we made this aluminum profile. For this reason, our product

also applied for the national appearance patent, plus When the traffic light is mounted on the cross arm of the traffic light pole, the light it emits

should be tilted downwards. If it is mounted on the pole of the traffic light pole, there should be an angle. Leaning 6 degrees to the left, in this way,

the driver’s friend can see more clearly, especially when some traffic lights are in the sun, that is to say, when the light is particularly strong, the

traffic light will not be affected by any.