AVAILABLE HERE: https://bit.ly/CuadroechoTItapered20
Description and materials
- New Echo Ti 20” frame, as a novelty in Asian brand Echo’s catalogue.
- This is a new edition that features multiple updates both in design and manufacturing, with the aim of making a light, reliable frame with state-of-the-art features.
- Completely made of 6061-T6 aluminium alloy, which allows for a great balance between low weight, great mechanical properties and affordable price.
- Triple butted main tubes modify its internal geometry and thicknesses to optimize the strength/weight ratio.
- The introduction of a tapered head tube also comes as a novelty, with 1 1/8” top diameter and 1.5” bottom diameter, which allows you to run a larger lower bearing, increasing its durability and frame’s overall front stiffness.
- The head tube is 100mm long and features a front hole to remove excess material.
- Also, this frame’s head tube is designed for integrated headsets (not internal headsets). Integrated headsets don’t require cups for the bearings, but they’re designed so that each bearing sits directly into the head tube.
- The main tubes are joined together and to the head tube with a gusset each, which provides additional strength and stiffness to the front end.
- The seat tube has an exclusive design by Echo, and instead of using a conventional tube, it’s been replaced by two 3D CNC-machined plates.
- Standard 68mm bottom bracket tube, threadless, designed for Spanish bottom brackets.
- The frame has bashplate mounts on the chain stays and down tube, with a gusset that helps dissipate impact loads.
- Each one of the chain stays is joined to the bottom bracket tube by a large 3D CNC-machined plate, which notably increases this critical area’s strength and stiffness.
- Curved seat stays help increase tyre clearance and also increase rear end’s stiffness.
- Horizontal dropouts spaced at 116mm, designed for Echo’s own integrated chain tensioner system (doesn’t require snail cams or any other chain tensioners).
- Each dropout is integrated in a high quality 3D CNC piece, joined to both stays. This increases rear end’s stiffness and strength exponentially.
- This frame is available with IS disc brake mounts, integrated into the dropout and supported further by a brace.
- Available in anodized black with red Echo Ti adhesives.
Geometry (measured with a 375mm x 35mm)
- Space between dropouts: 116mm
- Bottom bracket shell: 68mm
- Head tube: 100mm
- Wheelbase: 1000mm
- Chain stay length: 350mm
- BB Rise: +86mm
- Head Angle: 72º
Finishes
- Available in anodized black with red Echo Ti adhesives.
Weight
- 1394.5g (+ bashplate at 87.5g and titanium Echo SL Ti bottom brackets with bolts at 197g)
Additional information
Note: this frame’s stickers are supplied but not installed, therefore you can install them as you prefer.
If you have any doubts, please contact us on info@trial-bikes.com
● Sitio web: https://trial-bikes.com
● Instagram: https://instagram.com/trialbikes/
● Facebook: https://facebook.com/TrialBikesTB
● Twitter: https://twitter.com/Trial_Bikes
● Extensión Oficial YouTube aquí: https://myapp.wips.com/trialbikes-youtube
Post time: Jan-08-2017